01753 539222Script Rosebud Wedding Invitation and Place Card
A stylish and elegant wedding invitation with a matching place card. Why not use the same technique to add matching order of service cards and even thank you cards.
Materials and Tools
A pearlescent white square script card blank
A pearlescent white daisy topper
Two claret rosebuds
A sheet of silver mirri card
A white insert for a square card
Mini glue dots
Mini mounting pads
A glue roller or double sided tape
Scissors or a trimmer
Ruler
Instructions
1. The first thing we need to do is to frame the daisy topper. To do this, cut a piece of silver mirri card which measures approximately 67x75mm. Put glue tape on the back of the daisy topper and stick it down firmly onto the centre of the silver card.
2. We now need to spiral the stems of the rosebuds - I have used a cocktail stick to do this. Holding the actual rosebud firmly against the cocktail stick, wind the stem, as evenly as you can, around the stick. Slide the spiralled rosebud off the stick and repeat this for a second rosebud. Trim the rosebuds so that they measure just over 5cm in length, including the rosebud and the spiralled stem.
3. We now need to stick the two rosebuds onto the topper and stick this onto the card so that it is raised. Arrange the rosebuds on the table first, so that you have them exactly as you want them and then stick them down. You need to place the back of each rosebud centrally onto a glue dot (when they are still on the roll), then when you lift off each rosebud, they should lift the glue dots as well. Once you have glue dots on them, stick them down in the correct position. The topper is now finished.
4. Turn the topper over and place 9 evenly spaced mini mounting pads on the back of the silver card, trying to keep the ones on the edges about 5mm from the edge of the card. Take the backing paper off all of the mini mounting pads and stick the topper down centrally on the card.
5. Put a small line of glue tape on top of the folded insert, close to the fold line and fold the card, pressing down firmly.
Your wedding invitation is now finished!
If you would like matching place cards, follow the instructions below:
Spiral the stem of another rosebud (the spiral needs to be quite tight, as we are going to trim the rosebud to fit the size of the place card).
Cut the end off the stem, so that the spiraled rosebud measures just over 3cm in total and place the rosebud onto a mini glue dot.
Lift the rosebud and attached glue dot off the roll and position it in the top right hand corner of the place card, so that the stem goes down the right hand side but curves inwards slightly.
Related Products
 Product Code: PMH-2109 | A4 Mirri Card, Silver (5 sheets)A pack of 5 sheets of highly reflective siver mirri card. Each sheet is A4 in size, acid free and made from 280gsm cardstock. More information and bigger picture
|
 Product Code: EMR-456 | Bunch of 12 Rosebuds (Claret)A bunch of 12 claret coloured rosebuds, made from paper with green wire covered stems. More information and bigger picture
|
 Product Code: WSI-1453 | Card Inserts, Square, Linen White (10 pack)A pack of 10 linen white inserts that are designed to fit neatly inside our square wedding invitation cards. Each insert is textured with a subtle linen effect and are laser and inkjet compatible, allowing you to print your own wording for inside the card. More information and bigger picture
|
 Product Code: WSE-1478 | Daisy Corners Topper, Pearlescent White (12 pack)A pack of 12 square pearlescent white toppers with silver embossed daisy corners on them. These are designed to complement the Script range of wedding invitations. More information and bigger picture
Get one pack free when you buy 10 packs of selected Wedding Stationery Embellishments |
 Product Code: ADD-1170 | Glue Dots DidiA box of 200 didi glue dots. These acid free non-toxic glue dots are a permanent double sided adhesive. They are great for sticking small items. More information and bigger picture
|
 Product Code: ADT-1175 | Glue Dots Glue RollerThis "Glue Dots" glue tape is so simple to use and provides a quick and easy alternative to double sided tape, without the hassle of cutting it up and peeling off backing tape. The acid-free, permanent glue tape is 9mm wide and each roll has 18m of tape. More information and bigger picture
|
 Product Code: ADT-538 | Mini Mounting PadsAcid-free foam mini mounting pads that are about 2mm thick. The pack contains over 350 pads of about 5x5mm square. More information and bigger picture
|
 Product Code: WSC-1444 | Script Cards and Envelopes, Square, Pearlescent White (10 pk)A pack of 10 Square (125mm x 125mm) pearlescent white wedding invitations with matching envelopes. Each card has "Wedding" written around the edge in silver script. More information and bigger picture
Save £5 when you buy 10 packs of wedding invitations |
 Product Code: WSP-1436 | Script Place Card, Pearlescent White (10 pack)A pack of 10 pearlescent white place cards with "Wedding" written along the bottom in silver script. More information and bigger picture
|
